
Custom Container Solutions,Imagined by You. Built by Us.
Offices, workshops, farm storage, cold storage, pop-up shops, camps — and now turnkey homes and garden suites. Pick a use case, see our published starting prices, then get one itemized quote before any steel gets cut. Built in our Kamloops yard, delivered anywhere in BC.
10 ways a container goes to work
Each page has its own photos, starting prices and the questions people ask before they order. Pick the one closest to your job.

Container Offices
Insulated, wired 20' offices that replace the rented trailer — and move to the next project with you.
Explore Offices
Container Workshops & Tool Cribs
Insulated, lit and powered — a steel shop with benches, 240V and a roll-up door if you want one.
Explore Workshops
Farm & Ranch Containers
Rodent-proof, frost-ready storage for feed, tack and chemicals — delivered to end-of-road ranch sites.
Explore Farm & Ranch
Cold Storage Containers
Plug-and-run reefers or insulated conversions — walk-in cooler and freezer space, delivered.
Explore Cold Storage
Pop-Up Retail Containers
Serving windows, counters and your colours on a steel storefront that moves when the season does.
Explore Pop-Up Retail
Equipment Enclosures
Secure, ventilated housings for generators, pumps, compressors and controls — winter-ready and movable.
Explore Enclosures
Workforce & Camp Housing
Spray-foamed, wired 40' crew units, lounges and camp offices — ordered in multiples, delivered in stages.
Explore Camp Housing
TurnkeyContainer Homes
Single- or multi-container homes and cabins: engineered, permitted, finished in Kamloops, set on your land.
Explore Homes
TurnkeyGarden Suites & ADUs
A single-container backyard suite or studio: engineered, permitted, finished in Kamloops, set in your yard.
Explore Garden Suites
Container Bunkies
An insulated sleeping cabin from a single container: framed, lined, wired and finished in Kamloops, set at your place.
Explore BunkiesContainer homes & garden suites — now turnkey
Design and engineering coordination, permit-ready stamped drawings, structural work, insulation to the BC Energy Step Code requirement for your site, electrical and plumbing rough-in with licensed trades for the final connections, a finished interior, then delivery and set on your foundation. Engineering and permits are handled with you — your municipality has the final say on setbacks, size and servicing. Quoted per design.
What could yours become?
Every project below started as a plain steel box. Yours starts wherever you want it to.

Site Offices
Insulated, wired and windowed — a lockable office that arrives on a truck and moves when the project does.

Workshops & Tool Cribs
Workbenches, shelving, lighting and power in a steel shell nobody is cutting into overnight.

Pop-Up Shops & Vendor Bars
Side-opening serving windows, finished interiors and your branding — retail that sets up in a morning.

Cold Storage
Refrigerated containers hold anywhere from deep-freeze to cooler temps — produce, meat, bait or blooms.

Drive-Through Storage
Cargo doors on both ends — load from either side, or park equipment straight through.

Full Side Access
The entire wall opens up — display floors, staging bays and workspaces that need daylight and reach.

Branded Showpieces
Custom paint in any RAL colour with cut-vinyl logos — a container that advertises while it works.

Multi-Unit Compounds
L-shapes, lock-up yards, camps and complexes — several containers combined into one working footprint.
Don't see your idea? That's the point — call (778) 694-4050 and describe it.
Design your container in 3D
The Valleyview Container Studio is a free 3D container builder, with no sign-up to design. It draws your build while you make it. Pick a base container, drag the personnel door and windows along the wall until they sit where you want them, then choose framing, insulation and power. The estimate builds from the same catalogue published further down this page — the container, plus each modification at its list price.
Custom containers price out that way end to end: site offices, workshops, cold storage, pop-up shops. Bunkies, garden suites and modular homes can be laid out in the studio too, but they stay quoted per design — occupied space needs engineering and permit-ready drawings, so the number comes from the drawing rather than the menu.
Outside BC? The studio works from anywhere in Canada. Send the design and we quote freight to your site per project, as its own line; local rules vary by province and municipality, so confirm yours with your local authority. More for buyers outside BC.
- 1
Pick your base
10ft, 20ft or 40ft high cube, new or used — the 10ft is a new-only item.
- 2
Move the openings, then fit it out
Doors and windows dragged into place, framing, insulation and electrical.
- 3
Send it to our yard
Your design lands with our build team — we quote it line by line.

Every design lands with a real builder — reviewed, priced and sanity-checked before you commit to anything.
If it bolts, welds or wires to steel, we can build it
A container is structural steel — wind-rated, watertight and theft-resistant before we touch it. From that shell, our yard cuts, frames and finishes whatever the project calls for, and a licensed electrician we contract does the wiring.
- Roll-up & steel personnel doors
- Windows, skylights & security bars
- Spray-foam insulation & finished walls
- Electrical rough-in, LED lighting & heat
- Ventilation, turbines & HVAC
- Custom paint in any RAL colour
- Logos, decals & full-side graphics
- Shelving, workbenches & parts cages
- Serving windows, counters & awnings
- Partition walls & multi-room layouts
- Ramps, lock boxes & security upgrades
- Refrigeration & cold-storage conversion
Starting prices for popular builds
Real starting totals: an inspected container plus the modifications listed. Add or remove anything.
20' Insulated Site Office
from $14,600 CAD
+ tax & delivery
A lockable, insulated, wired office that arrives on a truck and leaves when the project does.
- Inspected used 20' container
- 36" steel personnel door
- 2× sliding windows with security bars
- Steel stud framing + rigid foam insulation
- 100A panel, LED lights, 4 outlets, exterior outlet
Quoted per design: Finished wall panels & flooring · Heat / mini-split · Desk & shelving
20' Insulated Workshop
from $13,400 CAD
+ tax & delivery
Bench-ready, lit and powered — a steel shop nobody is cutting into overnight.
- Inspected used 20' container
- 36" steel personnel door
- Sliding window with security bars
- Steel stud framing + rigid foam insulation
- 100A panel, LED lights, 4 outlets
Quoted per design: Workbenches, shelving & parts cages · Roll-up door · Compressed-air / 240V circuits
20' Pop-Up Shop / Vendor Bar
from $15,800 CAD
+ tax & delivery
A finished, wired retail box with your branding — sets up in a morning.
- New one-trip 20' container in your RAL colour
- 36" steel personnel door
- 2× sliding windows
- Steel stud framing + rigid foam insulation
- 100A panel, LED lights, 4 outlets, exterior outlet
Quoted per design: Fold-down serving window & counter · Awning · Logo decals & full-side graphics
Prices in CAD, plus tax and delivery. Every build is quoted line by line before any steel gets cut.
Every use-case page lists its own package. Container homes, garden suites and bunkies are engineered and permitted per site, so they are quoted per project.
Modification menu & prices
Every option is priced on its own so you can build up exactly what you need.
Doors & windows
- Steel personnel door (36")
- $2,400each
- Sliding window
- $1,200each
Framing
- Steel stud framingOur standard
- $1,900per container
- Wood framing
- $2,300per container
Insulation
- Rigid foam boardOur standard
- $1,400per container
- Closed-cell spray foam
- $4,800per container
- Rock wool (mineral wool)
- $1,600per container
- Fiberglass battsOn request
- $900per container
- Undercarriage insulation
- $1,100per container
Electrical & HVAC
- Basic electrical package
- $4,000per container
- HVAC pre-wire
- $450each
Prices in CAD, plus tax and delivery. Every build is quoted line by line before any steel gets cut. Prices reviewed 2026-10-26. Full menu with details
From idea to delivery, without surprises
One point of contact, one itemized quote, one committed timeline.
Tell us the vision
Draw it in the Container Studio, send photos of what inspired you, or just call and describe it — rough ideas welcome.
Approve one itemized quote
Container, every modification and delivery, each priced line by line in CAD before any steel gets cut.
We build it in Kamloops
Cutting, framing, wiring, insulating and finishing — all done in our own yard with a committed timeline.
Delivered anywhere in BC
Tilt-deck delivery and placement on your prepared site, from Metro Vancouver to the far North.
Real work out of our Kamloops yard
Photos of finished builds, not renderings. Every one started as an inspected, wind and watertight container.
Custom containers: common questions
Custom builds
How much does a custom shipping container cost?
It depends entirely on the build — an extra door costs far less than a fully finished office. Start with the published prices on this page: every modification is priced on its own and each package shows a real starting total. Then every project gets one itemized quote: the container, each modification priced line by line, and delivery. You see exactly where every dollar goes before any steel gets cut.
How long does a custom container project take?
Simple modifications are a smaller job than fully finished builds. Timing depends on the spec and our current build queue — your quote sets out the schedule, and we keep you posted as the build progresses.
Can you really build anything?
If it bolts, welds or wires to a steel container, almost certainly. Offices, bars, grow rooms, pump houses, ticket booths, tack rooms — if we haven't built it yet, we'll tell you honestly whether it's feasible and what it would take.
Do I need a permit for a custom container?
It depends on your municipality or regional district and the use; occupied spaces like offices often need approval, and container homes and garden suites always need engineered, stamped drawings and a building permit. Tell us the intended use and we'll make sure the build supports whatever approval your local building department requires — on turnkey homes and suites we handle the engineering and permit drawings with you.
Can you customize a container I already own?
Often, yes — it depends on the work and your container's condition. If your unit is rough, starting from a fresh used container is sometimes cheaper than rehabilitating an old one. We'll give you straight advice either way.
Can I finance a custom container build?
Ask about lease-to-own — straightforward monthly payments that end in ownership. It's most common on standard storage units, but tell us what you're planning and we'll quote the options.
What decides the cost of a custom container build in BC?
The container you start from and what you add, so there is no single figure. Doors, windows, framing, insulation, the basic electrical package and the HVAC pre-wire each carry a published price, and common builds such as site offices and workshops have published starting packages. Roll-up doors, finishes, plumbing and heat are quoted per design, and homes, garden suites and bunkies per project. Published prices are plus tax and delivery, and every build gets one itemized quote covering the container, each modification and delivery before any steel is cut.
Published modification pricesHow do I start a custom container project?
Tell Valleyview how you’ll use the space and where it’s going. You can call (778) 694-4050, use the contact form, send a sketch or photos of something you liked, or lay out a design in the Container Studio and send it; rough ideas are welcome. Valleyview reviews it and sends one itemized quote covering the container, each modification and delivery. Nothing is built until you approve that quote, and the quote sets the timeline for the build.
Design it in 3D firstHow long does a custom container build take, and when is the timing confirmed?
It depends on the spec and Valleyview’s current build queue, so there is no standard turnaround to quote in advance. Your itemized quote includes a committed timeline for the build, and delivery timing is agreed when you order. Container homes and garden suites also wait on drawings and approvals, because steel isn’t cut until the permit is issued. If you’re working to a project start date or a season, say so when you ask for the quote.
Can you build a container for a use you don’t list?
Often. Describe what the space has to do, the equipment or people it will hold and the site it’s going to, and Valleyview will tell you plainly whether it is workable in a steel container and what it would take. Work that isn’t on the published menu is quoted per design, and anything structural or engineered follows the drawings it needs. If people will work, sleep or serve food in it, check with your local government before you commit.
Can you add doors, windows or insulation to a container I already own?
Often, but ask Valleyview first, because it depends on the work and the container’s condition. Send photos of the container and a description of what you want done so the work can be assessed and quoted. If the unit is rough, starting from a fresh used container is sometimes cheaper than rehabilitating the old one, and Valleyview will tell you which makes more sense. Containers you already own can also be repainted and re-decaled.
Can you build a washroom, lunchroom or drying room for a work site?
Yes, quoted per design. Lunchrooms, dry rooms, kitchens and offices for a crew are built to an insulated spec, and a washroom or laundry unit can go in a 40ft high cube, or a 20ft for a small site. Plumbing rough-in, washroom and shower fit-outs, laundry hookups and kitchen ventilation depend on your water, waste, hot water and power, so describe those services early, and check with your local government and any health authority that applies.
Are the custom container images on your site photos of finished projects?
Not all of them. Some are computer-generated, such as Container Studio renders, and some are photos of standard containers used to illustrate a type of build; none of those show a finished project. The projects page shows photographs of work finished in Valleyview’s Kamloops yard, and new photos are added as builds leave the yard. To ask about a past or current build like the one you’re planning, call (778) 694-4050.
See finished buildsShould I modify a container myself or have Valleyview build it in the yard?
Either can work, but plan the order of the work. Cutting an opening removes structural steel that has to be reframed properly, and cutting a door or window after spray foam goes on means cutting through your own vapour barrier. Floor work, undercarriage foam and paint are easier in a yard than on site. Spray foam calls for a licensed installer, and a licensed electrician makes the final connection and pulls the permit, whoever does the rest.
Can several containers be joined into one building?
Yes, quoted per design. Removing a wall to join containers takes out steel that was holding the roof up, so joined layouts need structural reinforcement, and an occupied building may need engineered drawings. Joined container homes are set by crane rather than tilt-deck. Valleyview also supplies separate matching units for compounds and camps, with staged delivery. Joining, stacking or adding a roof can change how your local government treats the structure, so check with them before you design.
Who does the engineering on a custom container build?
A professional engineer, coordinated by Valleyview where the build needs one. Where your local government calls for engineered, stamped drawings, which is more likely for occupied space such as offices, crew units, garden suites and homes, Valleyview coordinates those drawings as part of the project and builds to them. If your own engineer specifies something, such as a classified area around equipment, the build follows those drawings. Your local government decides which drawings it needs.
Will my custom container build need a building permit?
It may, depending on what the build is for and where it’s going, and rules vary by municipality and regional district, so check with your local government before you order. Space people work or sleep in, such as offices, crew units, bunkies, garden suites and homes, is treated differently from storage and may be reviewed as a building, with drawings and separate electrical and plumbing permits. Give Valleyview the civic address and intended use early so the build supports whatever approval you need.
Container permit guideCan I put a custom build like a site office or workshop on lease-to-own?
Possibly. Lease-to-own, with monthly payments that build to ownership, is the only financing Valleyview offers, and it is offered on 20ft and 40ft containers. Whether a particular build, such as an insulated office, workshop or cold-storage unit, qualifies is confirmed with your quote, so ask when you request it. Container homes and garden suites are quoted per project instead, and most owners of those builds finance through their own lender. Valleyview does not rent containers.
Lease-to-own detailsIs there a warranty on custom modification work?
Warranty terms for modification work aren’t published, so ask Valleyview before you approve your quote and get the answer in writing. For the container itself, Valleyview’s terms say new containers carry a manufacturer’s warranty for structural integrity and watertight condition; ask Valleyview to confirm the details for your unit with your quote. Used containers are sold as-is without warranty, except as required by law. If a defect wasn’t disclosed at the time of sale, contact Valleyview right away to discuss a resolution.
Which container size should I start from for a custom build?
Start from the room the use needs and the headroom left after insulation. A used 20ft suits a site office, tool crib or equipment enclosure, and a new one-trip 20ft suits a pop-up shop. A 40ft high cube is a foot taller, which matters once framing, insulation and a ceiling go in, so it is the usual base for a full workshop, a two-room office, crew units, garden suites and homes. The base container is confirmed in your quote.
Can a custom build have a roll-up door, a full side opening or doors at both ends?
Yes. A roll-up door can replace one end or be added for daily drive-in use, quoted per design, and a 40ft high cube leaves more headroom for its drum and tracks. For a full side opening, start from a new 20ft or 40ft high cube side-door container, which opens along one long wall. For doors at both ends, start from the new 20ft double-door container. None of these are Container Studio options, so ask Valleyview to quote them.
Door configurationsWhat still needs doing after a custom container is delivered?
Usually the connections and any approvals. Inspect the build and sign the delivery receipt, then a licensed electrician connects the panel to your power source and pulls the electrical permit, and licensed trades make any plumbing connections. A mini-split or other HVAC unit is installed on the pre-wire, and on a generator enclosure the fuel supply, exhaust run and commissioning are the generator supplier’s job. If a building permit applies, your local government may need to inspect before the space is used.
Can a custom container be moved after it’s built?
Usually, yes. A modified container keeps its corner castings, so it lifts back onto a tilt-deck truck, and an office or workshop travels with its framing, insulation and wiring in place once your electrician disconnects the feed. Whether installed equipment can stay in for a move depends on its weight and mounting. Each move is quoted like a delivery, by distance and site access, and a new site means checking that site’s rules with the local government first.
Prices
How much does a 10ft shipping container cost?
A 10ft container is listed at $5,000–$5,500 plus tax and delivery. It has about half the footprint of a 20ft, for tight lots and small sites where a 20ft won’t fit. Smaller doesn’t mean lower-priced here: a new one-trip 20ft is listed at $3,700–$4,200, so if your site can take a 20ft, compare both. Because 10ft units are made by cutting and re-ending standard containers, they’re less common, so call (778) 694-4050 to confirm current availability before you plan around one.
Delivery
Do you deliver shipping containers anywhere in BC?
Yes. Valleyview delivers new and used containers across British Columbia, including off-grid sites, remote areas, First Nations communities, ranches and end-of-road locations. Every delivery is quoted by distance and site access, so distance changes the quote rather than whether delivery is possible. What decides whether a particular site works is the route in and the access at the drop spot. If you’re unsure about yours, call (778) 694-4050.
Preparing your site
Can a container go right beside my house, shop or fence?
It can, if the truck can reach the spot and local rules allow it. The truck backs in on a straight line and the container lands at the end of that line, so the gap has to fit the truck, which needs at least 10 to 12 feet of width, not just the container. Leave room for the doors to open, and ask your municipality or regional district what setbacks apply first. Backing it against a fence or building also removes approach angles for a thief.
BC delivery guidePermits & bylaws
Do containers on a job site or commercial property need approval?
Check with the local government before delivery, because the answer depends on the zone and how the container is used. On an active construction site, ask whether the container falls under the project’s existing permit or needs its own approval. In a commercial or industrial yard, ask about setbacks, fire access lanes and sightlines. If people will work inside the unit, say so on the call, because that is a different conversation from storage.
Custom builds
How do I get a quote for a design I made in the Container Studio?
Go to the review step and press Send design. Once it goes through, the studio confirms it was sent and gives you a saved-design link that reopens the exact build, and the team reviews it and follows up with an itemized quote. You can also download a build summary for your own records. No order is placed until you approve a quote, and if sending fails you can try again or call (778) 694-4050.
Business & lease-to-own
Can a contractor get storage, a site office and company branding on one order?
Yes. One itemized quote can cover plain storage units, a site office or workshop build, paint and decals, and delivery to each job site, with each item priced line by line. Branding is applied in Valleyview’s yard before delivery, so the units arrive carrying your company name, and the containers can be bought outright or on lease-to-own. Check with the property owner and the local government what’s allowed on each site.
Uses
Can I use a shipping container for storage while I renovate or move?
Yes. A container on your own property holds furniture and boxes through a renovation or a move, and you load and unload on your own schedule. Valleyview sells containers rather than renting them, so afterward it stays yours to keep for storage, move or sell, and lease-to-own is the only monthly-payment option. If it’s only there for the project, ask your local government whether a temporary placement needs approval or has a time limit.
Still have a question? Call (778) 694-4050 or see the full FAQ.
Custom container solutions across British Columbia
Valleyview Containers designs and builds custom container solutions for businesses, municipalities, ranches, First Nations communities and homeowners across BC. These use cases cover most of what we build: container offices, workshops, farm and ranch storage, cold storage, pop-up retail, equipment enclosures, workforce camp housing, container homes, garden suites and bunkies. Every build starts from an inspected, wind-and-watertight container and is fabricated in our own Kamloops yard: openings cut, doors and windows installed, interiors framed, insulated, wired and finished.
Pricing is published, not hidden. The modification menu on this page is the same list the yard quotes from — doors, windows, framing, insulation, electrical — and each package shows a real starting total built from our published starting prices. Use the Container Studio to design your container online, or work directly with our build team — either way you get one itemized quote covering the container, every modification and tilt-deck delivery to your site, anywhere in Interior or Northern BC and beyond. No allowances, no surprises, no steel cut before you approve the number.
Container homes and garden suites are now a full turnkey service. Container homes come with design and engineering coordination, permit-ready stamped drawings, insulation to the BC Energy Step Code requirement for the site, a finished interior and delivery to your foundation, quoted per design. A garden suite or ADU is one way to use BC's small-scale multi-unit housing rules, which require most urban municipalities to allow secondary suites and accessory dwelling units on residential lots — your municipality still has the final say on setbacks, size, servicing and design.
Explore container modifications and prices, container branding, the project gallery, containers for sale or current yard inventory.
Custom solutions delivered across BC
Related container solutions
Container Studio
Design your build in 3D and watch the estimate follow along
Learn moreProject gallery
Photos of real builds out of our Kamloops yard
Learn moreModifications & pricing
The full menu of doors, windows, insulation and electrical, with published prices
Learn moreBranding & Decals
Your logo and colours, applied to last in BC weather
Learn moreFleet & Bulk Sales
Volume pricing when the project needs more than one
Learn moreLease to Own
Monthly payments that end in ownership
Learn more

