Shipping Containers in Wasa, BC

Yes. Valleyview’s delivery area covers all of British Columbia, including Wasa, and takes in homes, acreages, businesses, job sites and remote properties. Distance is priced into the delivery quote rather than limiting where containers go, so the questions that matter are whether the truck has a clear way in and room to set the container down.

Delivery to Wasa isn’t part of the listed container price; it’s quoted for the actual site, and Valleyview doesn’t publish a flat rate. The quote reflects the distance from where the container ships (the Kamloops yard or a partner depot) to your address in Wasa, the roads on the way in, and how easily the truck can line up and back in. A level pad and room for the tilt-deck help keep it down, and the delivery quote is free.

The delivery date is agreed when you order rather than promised in advance. It depends on where your container is coming from, the distance to Wasa, your site, and road and weather conditions. With your quote, Valleyview confirms access, quotes the delivery and gives you a delivery window, so mention any deadline you’re working to when you ask.

No. Valleyview’s only yard is in Kamloops, at D3-1764 Kelly Douglas Rd, and Valleyview doesn’t operate a depot in Wasa; your container comes from that yard or from a partner depot and is quoted delivered to your address. You don’t need to visit to buy: request a quote by phone, email or the website’s quote form, confirm the order when you accept the quote, and inspect the container when it arrives.

Any unit in Valleyview’s catalogue: the new 10ft; new and used 20ft containers, plus new 20ft double-door and side-door units and a 20ft refrigerated container; and 40ft containers, new as high cubes (one with side doors) or used in standard or high cube height. The live inventory page shows units already in Valleyview’s yard, and other units can be sourced through partner depots on request and quoted delivered to Wasa. Availability, especially for the 10ft, is confirmed with your quote.

Yes, in a few ways. Each listing on the live inventory page is a unit physically in the Kamloops yard, with a photo when available, its recorded condition and its unit number when legible. For a unit sourced from a partner depot, ask what photos and condition details come with your quote. If you’re passing through Kamloops, call ahead to arrange a look in person, and inspect the container again when it arrives.

They can, for two reasons. Part of a container’s own price depends on where the unit is sourced, which is one reason listed prices are ranges, and delivery to Wasa is quoted separately for your site. Condition and, for new units, colour move the figure too. Your quote confirms the exact numbers, in Canadian dollars plus tax.

Firm, level ground and room for the tilt-deck truck. The spot should be dry and load-bearing, such as compacted gravel, asphalt or concrete, with blocks or railway ties under the corners recommended. For a 20ft, the truck needs 72 feet of straight, clear length including the container’s final spot, 10 to 12 feet of width and 16 feet overhead; a 40ft needs more. Look up along the route in, too: hydro lines, branches and carport roofs all count against that overhead space.

Yes, and they’re quoted like any other delivery, by distance and by what the route and site need. Before booking, the route is planned the way it actually drives, including the approach, the turnaround and the set-down. Send GPS coordinates or a map pin for a site without a street address, describe gates, forks and creek crossings, and add photos of the access road and drop spot.

Choose a 20ft if space or delivery access is tight, and a 40ft if you need volume. A 20ft gives about 1,170 cubic feet on a footprint roughly the size of a single-car garage; a 40ft gives about 2,390, or about 2,690 as a high cube, but needs more room for the truck. Check the setbacks that apply to your lot before you choose, and mark the footprint with room for the doors to swing.

They can, in both directions. In the East Kootenay and Columbia Valley, snow, ice and road conditions can move a date, and Valleyview’s terms exclude liability for weather delays. Frozen ground can make some sites easier to reach, and remote sites are planned around seasonal access windows. Clear snow from the route and drop spot, and choose a spot that stays firm after the thaw.

Plan for temperature swings and winter cold. Keep snow and wet leaves off the roof, keep the vents clear and use desiccants so condensation doesn’t drip on your things. Avoid heating it on and off, which is harder on a container than no heat at all. Before winter, put graphite or a dry silicone lubricant in the lock, and after the spring thaw check that the container is still level.

It depends on your property and how you’ll use the container, so ask the local government or other authority responsible for land use at your address before ordering; on First Nation reserve land, that’s the Nation’s own lands, housing or public works process. The answer can change if you modify the container or live or work in it. Ask about the zone, setbacks, lot coverage, any permit or siting plan, and whether ALR, a floodplain or a covenant applies, then get the answer in writing.

Yes. Site offices, workshops, cold storage and other builds are made in Valleyview’s Kamloops yard and delivered to Wasa like a plain container, with delivery quoted by distance and site access. Every build starts from an inspected, wind and watertight container, and one itemized quote covers the container, each modification and delivery before any steel gets cut. Timing depends on the spec and is confirmed in your quote.

Yes. Lease-to-own is offered on 20ft and 40ft containers delivered to Wasa, with the monthly payment, the term and delivery itemized in one up-front quote. The monthly cost depends on the container’s size, condition and your delivery location. Every payment builds toward ownership, and you can ask for a payout figure at any time. Valleyview doesn’t rent containers; lease-to-own is the monthly option.

All of the East Kootenay and Columbia Valley, including Cranbrook, Kimberley, Fernie, Sparwood and Elkford. Each delivery is quoted for its own address by distance and site access. If your community isn’t listed on the site, call (778) 694-4050: deliveries also go to off-grid sites, ranches, First Nations communities and end-of-road locations across BC.

Call (778) 694-4050, email valleyviewcontainers@gmail.com, or use the quote form on the website. Say which size and condition you want, how many, and where it’s going; a postal code is enough to start, and the full address or directions are needed before you order. Photos of the access help. The quote is free, doesn’t commit you to buy, and gives one all-in price for the container and delivery.

A 20ft container gives about 150 square feet of usable floor inside and covers 160 square feet of ground outside. A 40ft, standard or high cube, gives about 300 square feet inside and covers 320 square feet. A 10ft covers 80 square feet. Use the outside area for lot coverage and the outside length and width for setbacks when you check with your local government, and the inside figure when you plan shelving, pallets or a layout.

One-trip means the container was manufactured overseas, loaded once for a single voyage to North America, then sold. It is structurally new with minimal wear: straight walls, intact paint, tight door seals and a manufacturer’s plate only a year or two old. Valleyview’s new 20ft containers, including the double-door and side-door units, and its new 40ft high cubes are listed as one-trip.

A new one-trip 20ft container is listed at $3,700–$4,200 plus tax and delivery. One-trip means it was loaded once for a single voyage, so it is structurally new, with factory paint and minimal wear. New 20ft units come in a range of factory RAL colours, and pricing varies slightly by colour, so ask for the current colours when you request a quote.

A quote prices the container and delivery to your address together, so you see the all-in price for both before you commit, with applicable GST and PST added. The delivery portion depends on distance and site access, which is why it’s quoted for your specific site rather than listed. If you add doors, windows, insulation or other modifications, each one is itemized line by line on the same quote, so you can see what every part of the job costs.

Yes. You or someone you designate must be on site during delivery to confirm placement, inspect the container and sign the delivery receipt. If you can’t be there yourself, send someone who knows exactly where the container should go and which way the doors should face, and who will check it over and note any damage on the receipt before signing.

Check the doors, the floor and the overall condition before you sign. Make sure both doors swing and lock cleanly, look for soft spots in the floor, and stand inside with the doors shut to look for pinholes of daylight along the roof and door seals. Under Valleyview’s terms, any damage or discrepancy has to be noted on the delivery receipt at the time of delivery.

It can, if the truck can reach the spot and local rules allow it. The truck backs in on a straight line and the container lands at the end of that line, so the gap has to fit the truck, which needs at least 10 to 12 feet of width, not just the container. Leave room for the doors to open, and ask your municipality or regional district what setbacks apply first. Backing it against a fence or building also removes approach angles for a thief.

Remove the loose rust with a wire brush, clean the area, and apply a rust-inhibiting metal paint. Corten steel is rust-resistant, not rust-proof, and surface rust is cosmetic rather than structural. Rust that bubbles, scales or flakes off in sheets is a structural concern and needs a closer look. Walk around the container at least once a year and pay close attention to the roof and corners.

Stacking containers, adding a roof or lean-to, and cutting large openings can each move a container from storage toward being reviewed as a structure. Cutting removes structural steel, so openings need proper reframing. A container treated as a structure can bring footings, anchoring designed for wind and seismic loads, and a snow load review for an added roof or stacked units. If you plan any of these, ask your local government what review applies before the work starts.

Often, yes, but ask Valleyview first, because it depends on the work and the container’s condition. If your unit is rough, it is sometimes cheaper to start from a fresh used container than to rehabilitate the old one, and Valleyview will tell you which makes more sense. Send photos of the container and a description of what you want done so the work can be assessed and quoted.

Yes. One itemized quote can cover plain storage units, a site office or workshop build, paint and decals, and delivery to each job site, with each item priced line by line. Branding is applied in Valleyview’s yard before delivery, so the units arrive carrying your company name, and the containers can be bought outright or on lease-to-own. Check with the property owner and the local government what’s allowed on each site.

Care for the steel box like any container: keep it on level, well-drained ground, check the rubber door gaskets for cracks or tears, lubricate the door hardware once a year and treat surface rust before it spreads. Keep door openings short so the unit isn’t fighting warm air. For the refrigeration unit itself, ask Valleyview what servicing it needs and who can service it near you before you buy.

Yes, as purpose-built crew units. Valleyview’s crew unit starts from an inspected used 40ft high cube with a steel door, two windows, steel stud framing, closed-cell spray foam, a basic electrical package and an HVAC pre-wire. Bunks, partitions, interior finish, washrooms and plumbing are quoted per design, and multi-unit orders get matching specs and staged delivery. People sleep in these units, so check with whoever has jurisdiction, including a Nation’s own process on First Nations land, before you order, and expect a building permit and engineered drawings.